Cisco Meraki - SmartSwitch configuration guide

Introduction

The following guide takes you through the steps to configure your Meraki Cloud Controller (MCC) and associated access points to work with the Captini Cloud platform using a Captini SmartSwitch.

Follow the following configuration guide

SmartSwitch Deployment Overview

The Captini SmartSwitch issues DHCP addresses to the Access Point so please ensure the MCC is set to Bridge Mode. Otherwise the AP will provide IP's to the end users device.

Only traffic tagged with VLAN 2 (Public) and VLAN 3 (Private) will be routed to the SmartSwitch Captive Portal. All other 

For further information please contact the Captini support team.